Select Page

Multiplex Machine with Servo Motor and LCD Control System

Clear

Multiplex Machine is used to make Uniaxial, CBR and Marshall Tests. 50 kN capacity Multiplex Machine is equipped with a servo motor and LCD graphics control system and capable of doing test with the speed range of 0,00001 mm/ min to 51 mm/min suitable for CBR, Marshall, Triaxial and Uniaxial Tests. For analog measurement the frame can be completed with load ring and dial gauge. Load ring and dial gauge should be ordered separately.
If the machine will be used with a data logger, unilogger (TG-0325),load cell and displacement transducers should be ordered to complete the testing machine.
The tests such as Uniaxial, Triaxial, Marshall and CBR can be performed with the TM-0107 by adding the test accessories.

Accessories

Accessories are not included in the price of main device (unless stated otherwise) and may be purchased separately if required.


TS-0870 CBR Penetration piston, used to perform CBR tests
TM-0115 Compression Platens, used to perform uniaxial and
unconfined compression tests
TAS-0057 Breaking Head Stability Mould, cast iron,
for 4” (101,6 mm) Marshall Samples
TAS-0058 Breaking Head Stability Mould, cast iron,
for 6” (152,4 mm) Marshall Samples


To Perform Uniaxial Tests

TM-0115 Compression Platens, used to perform uniaxial
and unconfined compression tests. Supplied complete
with ball seating assembly


To Perform Triaxial Tests

TGM-0010 Load Cell 5 kN
TGM-0062 Linear Potentiometric Displacement Transducer, 25 mm
TG-0325 Static Unilogger 8 Channels
TS-0400 Triaxial Cell
TS-0405 Block for Pressure Measurement and De-Airing
TGM-0110 Pressure Transducer, 2000 kPa
TS-0408 Oil and Water Constant Pressure System
TS-0415 Automatic Volume Change Unit
TS-0416 Software to Perform UU Triaxial Tests
TS-0417 Software to Perform CU-CD Triaxial Tests


To Perform Marshall Tests

TAS-0057 Breaking Head Stability Mould, cast iron,
for 4” (101,6 mm) Marshall Samples
TAS-0058 Breaking Head Stability Mould, cast iron,
for 6” (152,4 mm) Marshall Samples


To Perform CBR Test

TS-0870 Penetration piston, used to perform CBR test

Specifications

Technical specifications are subject to change without notice.


Test Speed 0.00001 – 51 mm/min
Capacity kN 50
Dimensions mm (W x D x H) 550 x 700 x 1200
Weight (approx.) Kg 102