Select Page

One Gang Shrinkage Mould


The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened concrete and hydraulic cement mortar .
All moulds surfaces are protected with anti-corrosion oil. Also all parts of the moulds are matchmarked.
The moulds are supplied complied with the steel inserts screwed on.
According to all standardized test methods for determining the length changes under different conditions, the muolds are used together with the any Cooper Length Comparators (TC-1170) fits the specimens sizes.
TC-1170 Large Type Digital Length Comparator can be used cement/concrete prisms up to 100mm width Adjustable beam height (except dial gauge) is 365mm and 220mm horizontal clearance). TC-1170 Consists of a 12.7×0.001 mm graduated digital dial gauge which is mounted on a steel frame.
Reference rod and other equipment be should ordered separately.


  • ASTM C157
  • ASTM C1105


Accessories are not included in the price of main device (unless stated otherwise) and may be purchased separately if required.

TCM-0034 Spare Steel Insert, Pack of 12 Pieces
TCM-0035 Reference Rod, 295mm long
TCM-0662A Tamper, Hardwood 13 x 25 x 150mm
TC-0410 Tamping Rod Ø:10 x 300mm


Technical specifications are subject to change without notice.

One Gang Shrinkage Mould
75 x 75 x 285mm
Two Gang Shrinkage Mould
75 x 75 x 285mm
One Gang Shrinkage Mould
100 x 100 x 285mm
Large Type Digital Length Comparators
Dimension mm (W x D x H) 390 x 120 x 90 390 x 210 x 90 390 x 240 x 120 390 x 240 x 120
Weight (approx.) Kg 13 25 17 17