Select Page

600 kN Flexural Frame Column Type

600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four column design carrying the ram fitted to the upper cross head. The frames have a single acting down stroking ram with over travel switch protection to shut the machine down when maximum ram travel is reached. The return of the ram is done spring to get maximum accuracy on the load measurement. A load cell is used for load measurements on the frame. TC-5800 Flexural Frame is designed to accept all accessories required for flexural, transverse or compression tests. The load frame provides the stability needed for accurate and repeatable test results over the years of operation. TC-5800 Flexural Frame can be connected to any compression machine supplied by Cooper as a second frame or can be used with any of our supplied power pack as an independent Flexural Machine. Flexural test assemblies should be ordered separately.


  • EN 1338
  • EN 1339
  • EN 1340
  • EN 12390-5
  • EN 12390-6
  • ASTM C78
  • ASTM C293
  • ASTM C496


Technical specifications are subject to change without notice.

Capacity kN 600
Ram. Travel mm 350
Max. Vertical Clearance mm 930 (Without Accessories)
Max. Horizontal Clearance mm 640
Dimensions mm (W x D x H) 1100 x 2000 x 2650
Weight (approx.) Kg 2750