Select Page

Cement Flow Table

Clear

There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available.

The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 revolution per second. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle.

EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of brass and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height.

ASTM model; the table is manufactured from brass and has 254 mm diameter. The conical mould is made of brass has dimensions of 100 mm base dia. x 70 mm top dia. x 50 mm height. Both models are supplied complete with brass flow mould and tamper.

Standards

  • ASTM C230
  • EN 459-2
  • EN 1015-3

Accessories

Accessories are not included in the price of main device (unless stated otherwise) and may be purchased separately if required.


TCM-0661A Cement Flow Mould
TCM-0662A Tamper ASTM Hardwood
(13 x 25 x 150mm)
TCM-0661E Cement Flow Mould
TCM-0662A Tamper EN
Ø40 x 200mm 250g

Specifications

Technical specifications are subject to change without notice.


Cement Flow Table
(TCM-0660A)
Motorised Cement Flow Table
(TCM-0663A)
Cement Flow Table
(TCM-0660E)
Motorised Cement Flow Table
(TCM-0663E)
Table Diameter mm 254 300
Cone BaseTop Diameter mm 100.0 / 70.0 100.0 / 70.0
Cone Height mm 50.0 60.0
Drop Height mm 12.7 10.0
Dimensions mm (W x D x H) Manual 260 x 260 x 270
Motorised 470 x 360 x 350
Weight (approx.) Kg Manual 13
Motorised 36
Power W 180 (Motorised) 180 (Motorised)