Select Page

T4 Dedicated Coring Trailer

Clear

Hydraulic proportional drill feed mechanism ‘automatically’ ensures the fastest drill feed at optimum cutting speed



CRT-T4-DCT Dedicated Coring Trailer options:
Option 1- Hatz Diesel engine IB40
Option 2- Honda Petrol engine GX390

To carry out any form of testing straight & clean sided core samples are required. Vibration of a diamond core drill during the coring process will result in a badly finished core that will need to be ‘dressed’ before any meaningful testing can be carried out. In addition vibration of a core drill will also quickly damage the diamond cutting face by erosion of the individual diamonds resulting in rapid wear rates. Coring should always be carried out using a rigid, stable & vibration free operating platform to ensure the integrity of core samples. CRT-T4-DCT is a self contained remote controlled hydraulically driven diamond drilling trailer for taking core samples in roads or airport runways with concrete or asphalt surfaces. An hydraulically driven coring trailer provides consistent rotational torque when drilling in a variety of materials such as concrete, brickwork, rock or asphalt & steel re-bars.

Key Features


  • Lightweight Coring Trailer with approved total weight less than 740 Kgs
  • Remote control provides maximum operator safety and ease of operation
  • Simple Three Button Control complete with E-Button
  • ‘Proportional’ feed system with simple indicator lights allows for fast & safe coring
  • ‘Automatic’ Soft Start Drilling extends core barrel life & is ideal for inexperienced operators
  • 5 hours of normal working is possible with the 7 litres fuel tank & 210 litre water tank
  • Drill depths of 600 mm as standard with extension bars for deeper drilling
  • Drill diameters up to 250 mm
  • 94 dB Maximum noise level
  • PTO facility suitable for operation of hydraulic tools / tamper


Key Uses


  • Coring in both asphalt & concrete surfaces.
  • Ideal for taking regular test samples in road surfaces or airfield runways.
  • Ideal for drilling large numbers of holes to precise standards.

Accessories

Accessories are not included in the price of main device (unless stated otherwise) and may be purchased separately if required.


CRT-DRIL-999 Selection of 7 ‘asphalt’ coring barrels 107mm to 212mm diameter.
CRT-DRIL-611 Extension bar 100mm¹
CRT-DRIL-612 Extension bar 200mm¹
CRT-DRIL-613 Extension bar 300mm¹
CRT-DRIL-809 Spare wheel for CRT-MCT

Specifications

Technical specifications are subject to change without notice.


Engine Honda petrol GX390 or Hatz diesel IB40 engine
Fuel Tank 5 – 7 litres ( Sufficient for 4 to 5 hours of normal working )
Water pump 12v D.C on board
Water pump 12 V DC submersible
Water tank 210 litres capacity ( Sufficient for 4 to 5 hours of normal working )
Hydraulic reservoir 12 litres capacity
Hydraulic outputs 26-30 l/min @ 130 bar
Hydraulic Filtration Return line filter 25 micron
Suspension / Tyres ‘Alko’ EEC approved running gear with 13 x 145R tyres
Drill Diameter Up to 250mm in concrete or asphalt
Drill Depth Up to 600mm in one stroke with extension bars for deeper drilling
Electric Connection EEC 13 pin c/w 7 pin adaptor
Tow Hitch mm 50 ( 60 – 65 kg Nose Weight – Fully Laden)
Suspension Torsion bar to EEC specifications
Dimensions (W x D x H) mm 3300 x 1390 x 2130
Weight (approx.) Kg 480 Empty
(Approved total weight 750)

Maintenance

Annual Service and Maintenance Contracts are available for this device.
Please enquire for further details. Note: This device should be checked and calibrated annually.