Gyratory Compactor
Specifications
| Speed |
Normally 30rpm |
| Stress |
Normally 600kPa, Maximum 1000kPa |
| Actuator |
250mm |
| Internal Angle of Gyration |
0.2 to 1.2º |
| Electrical Supply |
220-240 Volts 50Hz @16A (others available) |
| Specimen Ø |
100mm and 150mm |
| Compressed Air |
7-10bar @ 350L/min |
| Mixtures |
Wet or dry |
| Dimension mm (WxDxH) |
780x1000x1920 |
| Working Space Required mm (WxDxH) |
2000x2000x2200 |
| Estimated Weight |
250kg |
| PC |
Required
(Please enquire for minimum specifications) |
System elements
The CRT-GYR-EN is comprised of:
- A highly rigid enclosed steel frame
- A 95mm bore pneumatic cylinder
- An integrated guard and specimen table
- A precision pressure regulator for accurate stress control
- An eccentric at the base of the mould for to produce gyratory motion
- Mitsubishi™ inverter for accurate speed control
|
|
- 300mm stroke linear potentiometer for specimen height measurement
- Footmaster™ wheels for uncomplicated movement
- The PC is connected to the CRT-GYR-EN through a high speed USB connection
- A highly accurate National Instruments™ 16bit card is used for control and data acquisition
|
